Universal Garage Door Opener Replacement Remote Controls

Original replacement garage door opener remote controls are sometimes no longer available or can be very expensive. If your remote control is no longer available you can fit a replacement garage door remote control kit comprising of a new receiver and transmitter.

The benefits of fitting a remote control kit are many, you will be using the latest operating frequency so are unlikely to suffer from interference and range problems, modern remote controls are more reliable and due to modern manufacturing methods less expensive, also you will be able to readily purchase additional transmitters when required.

Universal remote control transmitters are also a cost effective way of adding additional transmitters to your existing garage door opener, even if the original transmitters are still available, again modern manufacturing techniques improve reliability and reduce costs.

Universal Garage Door Opener Remote Control Kit

The universal garage door opener remote control kit can be used with any garage door opener that has an existing open / close push.

Easy to fit simply connect the 2 wires from the garage door remote control receiver to the existing push button, and plug the receiver into a mains power outlet.

Keyring size 2 button transmitter can control two garage door openers.


Wireless Garage Door Opener Digital Keypad

This wireless keyless entry digital keypad allows secure, coded access to your garage without a remote control or keys, just by entering the private 4 digit security PIN code.

Works with the Skylink 318R receiver shown above.

Simple wireless installation, personal access codes and backlit keypad.


Additional Remote Control Transmitter For Use With The Universal Garage Remote Control Kit

Keyring size 2 button remote control transmitter can control two garage door openers when used with the Skylink 318R receiver shown at the top of this page.

This remote can also be used to control plug in lighting, fan or small appliances with the Skylink SW-318R Wireless Switch Receiver.


Clicker Universal Garage Door Opener Remote Control Transmitter – KLIK1U

The Clicker remote control will work with virtually all major brand garage openers. Two buttons allow control of 2 garage doors, even if they are different brands.

Compatible with garage openers made by Genie, Linear/Moore-o-Matic, Stanley, Overhead Door, Wayne-Dalton, Craftsman, Chamberlain, and LiftMaster operaing on the following frequencies 300/310/315/372/390 MHz.

You can download the instructions for further details of compatability.

Clicker Universal Garage Door Remote Control Instructions


Skylink 69N Universal Garage Door Opener Remote Control Transmitter

This Sylink 69N universal remote is compatible with most major brands of garage openers manufactured up to 2008. It will work with garage openers that use the following coding methods, binary and trinary DIP switches, Intellicode and rolling code, and work on the following frequencies 300mhz, 310mhz, 318mhz, and 390mhz.

Note: not compatible with “Securecode” manufactured by Stanley®.

Small keychain size, ideal for convertibles, motorcycles and bicycles, operating range of 100 feet and more.

Supplied with battery and mounting bracket.

You can download the instructions for further details of compatability.

Skylink 69N Universal Garage Door Remote Control Instructions


Visor Mount Garage Opener Remote Control for Lift-Master, Sears, Wayne Dalton, Master Mechanic & Chamberlain Garage Openers

The Skylink 200 remote control is compatible with the following brand remote controls manufactured between 1983 and 1997 Lift-Master, Sears, Wayne Dalton, Master Mechanic & Chamberlain Garage Door Openers with DIP switches.

100 feet operating range.


Motorcycle Garage Door Opener Remote Control Kit

The motorcycle universal garage door opener remote control kit can be used with any garage door opener that has an existing open / close push button.

Easy to fit simply connect the 2 wires from the garage door remote control receiver to the existing push button, and plug the receiver into a mains power outlet.

The small remote control is ideal for your motorcycle or bicycle and is supplied with a handlebar mounting bracket.